WBP Glue C/D Full Radiate Pine Commercial Plywood

Commercial plywood can be divided into two kinds according to its usage: packing plywood and furniture plywood. According to different veneer, there can be bintangor plywood, okoume plywood, pine plywood, keruing plywood, etc. Now also have some new hotsale veneer such as red oak, teak, sapele and so on.

Face/back:Pine

Core:Poplar,hardwood

Glue :phenolic A BOND WBP glue
Thickness:From 3 mm up to 25 mm
Size:
1220 / 1250 x 2440 / 2500 mm

What is CDX Plywood?
CDX plywood is a kind of economical plywood . Usually CDX plywood are sanded but not polished . So the face/back of CDX plywood is rough . Some knots and knot holes exist in the face/back .
CDX Grade comes from US voluntary plywood Standard PS1-95 for Construction and Industrial Plywood established by APA – The Engineered Wood Association.
C： Tight knots to 37.5 mm (1-1/2 in.). Knotholes to 25 mm (1 in.) across grain and some to 37.5 mm (1-1/2 in.). Synthetic or wood repairs. Discoloration and sanding defects that do not impair strength permitted. Limited splits allowed, stitching permitted. C-grade veneer minimum permitted for Exterior panels.
D： Knots and knotholes to 62.5 mm (2-1/2 in.) width across grain and 12.5 mm (1/2 in.) larger within specific limits. Limited splits permitted. Stitching permitted. Use of D-grade veneer limited to Exposure 1 panels.

Features and Benefits

*Easy to handle, low in weight, High nail-holding ability;
*Consistent in size and performance,
*Low in cost and available in sheet form.
*Good weathertight and waterproofness.

Application
CDX - Unsanded panel specially designed for structural subfloor decking, wall and roof applications. Can also be used for shipping crates, pallets and pallet bins, shelving, partitions, and other construction and industrial applications.

Product Images