When unloading, use four wooden rafts with a height of about 100mm at the bottom of the plate. The plate should not be placed directly on the ground. The height of the plate should not exceed two meters. The board should be stored away from direct sunlight, dry and ventilated environment. When pasting various veneer materials on the surface of the board, please clean the surface of the board with dust, dirt, oil stains, etc., then polish it with 360# woodworking sandpaper and paste it with professional adhesive for the facing material. If the air humidity is greater than 80%, it is not suitable for the construction of the pasting facing material. When processing, it is recommended to take a few sheets of the test before batch processing. If it is caused by unnecessary mass production without trial, it will not be within the scope of the Jisheng Tang Dynasty.
