Plywood PanelsPine Panels AC / BC
Excellent for construction use. Strength and stiffness.
Exceptional resistance to moisture. High thermal and acoustic insulation.
Optimal results for exterior and interior uses.
TECHNICAL PROPOSAL FOR ITS USE
Pine Panels panel has homogenous sanded faces without open defects and are mainly used for concrete form, industrial applications and furniture. Faces are sanded, and have few natural wood or synthetic repairs.
CHARACTERISTICS
Pine Panels are constructed using 100% plantation Radiata Pine veneer.
Panels are constructed by gluing veneers together perpendicularly, with the face grain always being in the long direction. Uneven numbers of plys are used to reach the best stability and strength resistance.
Grade used for faces / backs : A/C B/C
Grace A: Face with no open defects, free from knots and without discoloration.
Grade B: Face with no open defects some repairs and some occasional tight knots.
Grade C: Grade according to common use for construction with some small open defects.
SIZES
Thickness:
9 mm = 11 / 32’’
12 mm = 15 / 32’’
15 mm = 19 / 32’’
18 mm = 23 / 32’’
21 mm = 27 / 32’’
Dimensions:
Width 1220 mm = 4’’
Length 2440 mm = 8’’
RECOMMENDED USES
Concrete forming
House building
Furniture
HUMIDITY
During manufacturing, panel humidity is controlled and stabilized to 8%.
THERMAL INSULATION
This plywood are excellent to be used as exterior sheathing or interior panels due to their low thermal conductivity coefficient (k=10 Kal-m/m2 hº C).
ADHESIVES
Pine Panels are produced using phenolic resins with low polluting emission in accordance to European E-1 norm. This allows outdoor uses with an exceptional resistance to moisture without causing environmental pollution when used in interior applications.
