pp plywood

PP plastic coated plwood panels are made of wear-resisting and corrosion resisting 0.5mm thickness PP Plastic on both of sides coating and connecting to inner plywood core.

Film Faced Plywood

The Grade from finger jointed core to Full core.

Repeated use times can be from 2-30 times according to different raw materials.

Product Name	PP Faced Plywood
Color of Film	green pp or pvc plywood
Density of Film	high density, pp pvc plywood
Finish of Film	green
Origin of Film	Domestic
Core	Poplar,Combi,Eucalyptus,Birch.Mixed Hardwood.lmported Hardwood
Glue Type	Melamine,WBP
Thickness	12mm,15mm,18mm,20mm,21mm
Moisture	≤9%
Board Density	>530KG/M3(Poplar Core),>630KG/M3(MixedHardwood Core), >700KG/M3(Birch Core),>70OKKG/M3(Bamboo Core)
Bonding	≥0.7MPa
Strength	≤G.100R
Abrasion Impulsion	40KJ/M2
Modulus of Elasticity	≥5000MPa
Bending	40MPa
Warp Degree	≤1%
Thickness Tolerance	±0.5MM
Expansion Rate of Thickness	≤8-14%
Time of Usage	≥15-20Times
Application	Construction,Truck/Container,Flooring/Packaging

Size:

1.Small sizes:915x2135mm,1200x1800mm,1525x1525mm

2.Standard sizes:1200X2400mm,1220x2440mm,1250x2500mm

3.Big size:1500x3000mm

Glue:

WBP - Phenolic & Melamine

Amount of the glue, to take 1.7mm thickness veneer for example, the amount of glue used in other factories is 0.25kg/m2, but ours is 0.33kg/m2. It will effectively avoid open joint(core gap) and delamination and ensure the high strenght of plywood in application.

Advantages

Rugged, wear-resistant,and cost-effective

Good quality and high turnover rate

Surface coating,moisture-proof, strongdurability

Product Images

PP Plywood 1